5 Mistakes that all Cyclists do as a Beginner | Learn How to Avoid Them

Are you new to Cycling? First of all, kudos for choosing it! Cycling has a lot of health benefits relating to cardiovascular health, stress reduction, posture improvement, reduction of body fat, and many more. Also, the other plus about this is that most of the people know how to ride a bicycle on road, and there’s nothing more complex to follow.

Still, there are a few points that you must consider while cycling especially if you are a beginner.

5 Mistakes that all Cyclists do as a Beginner

Cycling is a fun activity, and there should be no rules for the fun, isn’t it?

But, what if you can make it more fun and effective than before? This is why I have listed out the top 5 mistakes that people do as a beginner. You can a take of note of them so as to avoid them.

Cyclists Mistakes Learn How To Avoid

#1 The Right Fit Bike

This is something that people usually skip out on. I don’t know why.

If the size of the bike is not right, then it will cause some pain to your body. Then you probably won’t ride it again. The two key aspects to note – seat height and the reach. There should be only a slight bend on the knees when your foot is below the paddle stroke, whereas reach is for your arms reach on the handle. Your torso should make an angle of 45° with your arms, that’s the standard figure.

#2 Doing too much in Advance

Take it slow initially. There’s no need to do a lot of stuff at the first go!

#3 Not using the Cycle Gears

Gears are just like your reliable friend who never gives up on you. Not making the best out of the Gears is yet another beginner mistake to avoid. Depending on the terrain and the traffic, set the gears on the cycle. This makes your going easy and smooth.

#4 Waiting to get all the Right Accessories

I have done this. Haha, what to say! Just don’t wait for too long. Set the cycle, and just for it!

#5 Setting the seat too low for your Height

If you keep the seat too low, then you would have to under-extend while making the pedal stroke. This may seem comfortable at first, then later it may cause any injury. Therefore, set the right seat height.

Did you like reading this piece? Find out more on pitangobikes!

Why Cardio is Important | 10 Health Benefits of this Amazing Exercise

Cardio is an integral part of any exercise regime and something that you just can’t avoid. It is found to be helpful for anybody who wants to lose weight, get fit, or maintain a healthy life. If you want to lose weight, then you will have to perform 300 minutes of cardio in a week! Yes, guys! You need to put in that much efforts. But why you need to perform Cardio? What is it’s health benefits?

Cardio Workouts

Our Topic – Why Cardio is Important?

My friend Lucy started her gym last week, and she told me about the exercises and other things that they perform there. She added, Cardios are fun and the best part of all! I said that sounds so much positive, and asked her the quick benefits of it. She went clueless! That’s when I realized that not many people are aware of the advantages, and I should probably blog about it.

So here I am, did some research and got some insights about the Cardio from one of my trainer friends in the city. Cardio is essential, because:

1. For the Heart Health.

Heart HealthCardio exercises are rightly working on the cardiovascular activities, and this, in turn, keeps all the heart functionalities in check.

2. Burns Fat

Yes, you could burn more fat with cardio.

3. Good for the Lungs

This kind of exercise can increase the lung capacity.

4. Better Sleep

Going through sleep issues? Cardio will help you get through it. Within a week of cardio, you will start having better sleep routines.

5. Keep the appetite in control

Better SleepThis is something really important, and something which is quickly ignored.

6. Mood Enhancer

Are you the grumpy kid? Effective Cardio Workouts can help in dealing with all your mood issues.

7. Improves the joint movement

Reduce the arthritis pain and the stiffness on the joints, by including Cardio.

8. Lessens the stress

This is so mandatory. Yes, exercises keep the stress at its lowest and you can get this from Cardio as well.

9. Good option for the diabetic patientsControls the Blood Pressure and Cholesterol

It’s found to be beneficial for someone having diabetes.

10. Controls the Blood Pressure and Cholesterol

If you keep your heart healthy, then automatically it keeps your Blood Pressure in control too. Found best for the cholesterol patients as well.

So, these are the Benefits that you can get from Cardio Exercises!

Stay Fit. Stay Happy!

8 WoodWorking Hacks to Make Your Life a Little Easier

If you’ve been woodworking for any kind of amount of time, then you most likely have actually encountered these regular problems from time to time. In the video clip that we’ve shared today, Mark shows 8 impressive hacks as well as techniques that you can utilize making it a bit much easier to finish your projects promptly and without mistakes.

Right here’s the initial Hack.

Hack # 1: Don’t have the best drill bits size

Cut the head off of a nail, put it on the drill and use the nail as the drill little bit to pierce in the piece of wood. It works wonderful even with wood workpieces.

What did you think?

Pretty neat huh! Let us know how you liked the video in the comment section below and if even 1 hack saved your day today then share it with your friends on Facebook!

Top 5 Accessories That You Get With Your Router Table

So, you just got a router table and also it’s remarkable. However, I can wager you that you forgot at the very least 3 of the top 5 accessories that can assist you get better cuts and also make the most out of your router table.

Then you could read about the finest router tables at routertablereviews.net, if you still haven’t obtained a router table.

If you’re not exactly sure exactly what they are after that here I have actually compiled a listing of the top 5 router table accessories that are an all time favorite of mine and will help you take your woodworking projects to the following level.

1. PUT PLATE

Often after that you need to have an insert plate incorporated right into your router table if you’re intending on utilizing numerous little bits.

The very best part concerning having an insert plate is that instead of needing to work below the table to alter bits, you could simply stand out the plate to your degree as well as working from a hassle-free sight as well as functioning room.

Most put plates are priced from $25-$ 100 and it is advised to get it from the same brand that you acquired the router table from.

2. T-TRACK AND MITER TRACK

These are generally steel channels that you install in your table to make sure that you could easily mount the plume boards as well as provides you much more control over how you deal with your stock.

These are valued from $10 as well as it actually does not matter from where you get them as they’re basically the very same thing. The only thing that differs is the size.

3. SPEED CONTROL / ON-OFF SWITCH

If your router doesn’t have the rate control function, after that you could get it as an add-on to your router table. As soon as installed, all you should do is transform the dial and you can regulate the speed of the router at your will.

If your router does have a rate control attribute, then you might want to add the on/off button to your router table. This will certainly allow you to swiftly switch over power to your router without needing to go right to the plug.

While the various other devices are good-to-have, I would highly suggest you to get one of these as a precaution. You should be able to promptly close down power in case points fail.

You can easily obtain your hands on these type of control board for $25-$ 40.

4. FEATHERBOARDS

When working with small items of lumber, maintaining control with a 20,000-rpm router could be a laborious.

A featherboard permits you to do just that. Its task is to apply stress to the workpiece and maintain it tough while the router is doing its task. You definitely do not want the item of timber to leap about as well as leap out of setting while you’re at work.

5. GUARD AGAINST THE BIT

This one is an additional crucial add-on that I strongly suggest, maintaining safety and security in mind.

You need to guard your fingers and also various other important body organs from the little bit as well as any type of reducing we want need to be done on the work surface.

When working on your next large job, this little add-on makes certain that you’re safe.

5 Full body cardio workouts good for you

Well, if you haven’t been doing cardio yet you are making a big mistake. Cardio workout is really important and will help you stay fit and healthy.

In case you did not know what cardio workouts are good for you then you are in the right place. To help you out, below in this article I have covered 5 cardio workouts that will work on your entire body.

Mountain Climber

You don’t really have to worry a lot since you won’t be climbing any real mountains obviously. Here what you will have to do is touch the ground with your hands and keep your legs and back in a slant pose. Now move your right foot near your chest and keep the left leg straight.

Now what you have to do is switch the legs as quickly as possible while making sure your core remains engaged. Keep doing this for at 15-20 reps before moving on.

Plank to Push-up

For this cardio workout as the name suggests you will have to start in a plank pose with your forearms on the floor. Now all you will have to do is elevate into a push up pose.

Remember that you will do it one hand at a time. Once you do that move back into a plank position. Do this at least 10-15 times for each arm and remember to switch arms as you do it.

Tuck Jump

If you love jumping exercises then you will definitely love the doing the tuck jump. What you have to do here is firstly stand up straight while keeping your knees a little bent and once you are in that pose you have to jump.

While jump bring your knees near to your cheat and put your arms straight out in the front and while coming doing put your arms back down. Do this at least 10-15 times and try and jump as high as you can.

Standard Burpee

One workout that is very effective but most people tend not to like is the standard burpee exercise. Here what you have to do is begin in a low squat pose with your hands touching the ground.

Now you have to kick your legs back and move into a push up pose and then return to the previous position quickly and then jump as high as you can before returning to the squat position once again. Do this for at 10 times.

Push Up Burpee

This cardio workout is very similar to the one I mentioned above except that it is a slightly more advanced exercise. You will have to start like you did for the previous one.

The only difference is that once you are in a push up position you will have to do a push up every time before you go back to the squat position and jump. You should do the push up burpee at least 8-10 times before you move on.

5 Excellent Cardio Based Warm up Exercises

In case you are looking for a way to improve your heart functioning, burn calories and also build strength then you should definitely consider cardio workouts. Cardio workouts can play an important role in helping you maintain your health and can keep loads of diseases away.

So in case you plan to start cardio workout from today below I have covered a few warm up exercises that I personally love to do before hopping on my rowing machine (read about the best rowing machine here)

Skipping

If you thought skipping was just for children then you are wrong. In fact skipping is a great way to get warmed up before an intense cardio workout. All you have to do is lift your left knee near to you hip and then lift your right hand over your head. Start with the skipping motion and then keep changing your hands and legs after a few jumps. You should do around 10-15 skips and jump as high as possible.

Climbing Stairs

I am sure many of you may not know this but climbing stairs can also help you get warmed up for your cardio workout. All you have to do is climb and get down the staircase. Make sure you do it at a brisk pace until you start sweating. You should climb the whole length of the stairs so that there is less turning as it will help you avoid feeling dizzy. Try and take the stairs every time you get home or are at the office to maintain fitness levels.

High Knees

This warm up exercise as the name suggests is about lifting your knees. All you really have to do is stand straight and create some gap between your feet. Once you do that you just have to lift your left knee as high as you can and then put it back on the ground. After this do it with your right knee and keep doing it for about 25-40 seconds straight without stopping.

Alternate Leg Bounding

Well for this warm up exercise you are going to need a good amount of straight space so make sure you find a place like either a hallway or a track before you attempt this warm up since you will need to move forward. Here what you have to do is stand straight and then lift your left leg and then reach ahead for your knee and then jump and land on your other foot. Jump a far as you can. You should do at least 10 of these jumps.

Butt Kick

Well this literally means kicking your butt, not in a bad way though. To complete this cardio warm up exercise all you have to do is jog where you’re standing and while doing that you need to kick your heels back towards the glutes. An important thing here is that the force should come from your hamstrings. You should continue to do is warm up for at least a minute before you go ahead and start your cardio workout.

The Ultimate Guide to Chisels and Gouges

Ever questioned just what’s the distinction between Chisels and Gouges?Well, here’s an outstanding infographic that covers everything you have to find out about Chisels and also Gouges. Exactly what they are, the best ways to utilize them, various variants they come in, etc. If you’re a woodworking nerd then you’re in for a treat.

Primarily, both tools contain a blade as well as a wooden take care of and also are used to shape and carve details right into timber.

When it involves Chisels, the sides are either outcannel or incannel, while gouges been available in two variations: Firmer and also Paring.

There are 10 various variations of Chisels:

  1. Back Bent Chisel
  2. Bent or Cabinet Chisel
  3. Firmer Chisel
  4. Edge Chisel
  5. Mortise Chisel
  6. Paring Chisel
  7. Glossy Chisel
  8. Fishtail Chisel
  9. Dogleg Chisel
  10. Butt Chisel

There are 10 various variations of Gouges:

  1. Back Bent Gouge
  2. Bowl Gouge
  3. Bench and Cabinet Gouge
  4. Fishtail Gouge
  5. Firmer Gouge
  6. Paring Gouge
  7. Spoon Gouge

Chisels and also Gouges 101: An Introduction to Basic Woodworking Tools

5 Great Cardio Workouts for your Legs

If you thought cardio workouts are only related to heart and lungs you are wrong. In fact cardio workouts are a great way to tone your leg muscles too. Below in this article I am going to provide you with 6 really good cardio workouts that will help you tone your legs and strengthen your knees too.

Squat Jump

The squat jump is not very different to the normal body weight squat. In fact you need to start with a normal squat where you need to keep your heels on the floor and bend the hips and knees until your thighs become parallel to the ground.

If you’re planning to use weights then make sure you have a good pair of weightlifting shoes to provide the support and balance that is needed for a good lift.

Once that this done immediately jump up while you rise and put your arms over your head. You need not be very fast, do it at a brisk pace. You should do the jump squat at least 10-15 times.

Box Jump

For this leg cardio workout you will need a big box. The box should be big enough so that you can jump on it without missing it and should be tall enough so that it takes you at least some amount of effort to get on top of it. Once you have the right box stand in front of it. Now with your legs and shoulders apart jump onto the box and once you land properly on the box get back on the floor. Jump at least 10 times.

Frog Jump

The problem with frog jump is that it is not as simply as you may think. You will need to firstly squat down and touch the floor with both of your hands. Just make sure that your arms are straight and not bent. Once that is done all you have to do is jump into the air and lift your knees as high as you can before you touch the ground. You should do at least 10-11 frog jumps.

Step Up

No you do not have to go watch the movie. For this cardio workout you will firstly need to search for a hard elevated surface. Once you have found the right surface you have to keep the right or left foot on it and they lift yourself on it till your leg is straight.

Make sure the power for the lift comes from your hamstrings and the glutes. Once you are straight come back down. You should to this at least 10 times for each leg.

Single Leg Hop

Well if you love rabbits then this is the perfect exercise for you. In fact you will have to hop like one. For this cardio workout you have to stand on your right leg and jump ahead and land on the floor on the same leg. Make sure you jump as far as you can. Keep alternating between both your legs with every jump. You should do the Single Leg hop at least 10-15 times before moving on.

5 Cardio Workouts for your Arms and Core

There are loads of cardio workouts than can help you build your arms and core. In case you did not know what cardio exercises they are and how to do them you are in the right place because here I am going to tell you about 5 cardio exercises that you should do in case you want to focus mainly on your arms and core.

Jumping Jack Planks

For the jumping plans cardio workout you will have to begin in the usual plank position i.e. your shoulders should be over the wrists and your body should be absolutely straight. Just remember that your feet should be kept close to each other.

Once you are in the right pose start doing jumping jacks with your legs moving them sideways and back close to each other. You should do this at least 10-15 times before moving on to the next workout.

Power Punch

If you are a boxing fan then you will definitely love this workout. Here what you will have to do is stand with your legs and also your shoulders slightly apart and also with your right leg a little ahead of the left. Keep your fists up and your elbows inwards.

Now that you are in the right pose punch the fist that is nearest to the body while turning your torso. Punch at least 10-15 times before you shift your stance to the other side.

Flutter Kick

Once you are done with the 2 Effective Cardio Workouts given above note that the flutter kick is moving to a higher level. For this workout you will have to lie down on the floor with your arms to your side and your legs straight.

Once that is done elevate your heels off the ground, about 5-6 inches should be fine and then start kick up and down. You should do this for at least a minute. Just make sure that your core is committed as well. In a world of uniformity and disposable fast fashion, Pitango Bike is pioneering a return to beautifully crafted, high quality, stylishly designed bespoke bikes for men and women.

Uppercut

In case you wanted another boxing movie here it is, the uppercut. This is quite similar to the previous one. You need to begin by taking up a stance similar to the one you took earlier.

The only difference being that this time you will have to punch the back fist in an upward direction liking you are punching the sky. Continue doing this for 25 seconds and then switch to the other fist. You can also try a 102 power punch combo.

Bicycle

I am sure many of you may have already heard about this exercise before and most of you may have also tried it at some point of time. You will have to lie down with your knees near your chest and hands behind your head.

Now all you have to is imagine you are riding a cycle and start pedalling. You should continue to pedal for about 1 minute before you stop. If you can carry on a little longer do not stop.

6 Things To Consider Before Buying Your Next Router Table

If you’re a serious woodworker, then you could not work without a good router table. A router table allows you to transform your woodworking projects into art.

Using various router bits, you could create a large range of grooves, forms and designs.

There are a couple of points that you need to consider prior to you acquire your initial router table.

1. Compatibility:

You need to ensure that the router you have is compatible with the router table that you’re interested in. It’s not something you have to fret about if you haven’t acquired the router yet, or you’re mosting likely to get them with each other.

2. A Sturdy Top:

It’s truly important to have the top as sturdy and as level as possible. This makes certain that the cuts are tidy as well as throughout the job item. A great top plate goes to the very least 1″ thick and also the product used need to be tough and also normally stiff.

3. A Good Base Plate:

Much like the top, the base plate too, must be inflexible, flat and also lug a strong develop. The top quality as well as the style of the base plate makes a substantial impact on the high quality of your work. A generally preferred material that creates a durable base plate is Machined Aluminum.

And also once again, the base plate needs to be compatible with the router that you’re intending to deal with.

4. Miter and also T Slots

You have to have these ports in position. Also if you’re not intending to buy any kind of accessories now, you will certainly require them to sustain your plume boards and accessories in the future.

5. A Good Fence

The fencing ought to be very easy to position and accurate to make sure that you can obtain tidy, premium quality cuts, just the way you desire them to be. When picking fencings, there’s a vast range of attributes as well as designs that you can get. They vary from the extremely standard blocks of wood clamped to the table surface area to complicated fences with different change functions.

Frequently, there are 2 categories of fences i.e. one item and also two-piece.

The essential advantage of a one-piece fence is that you do not have to stress over alignment problems. It’s a single item and also remains constant.

Now with a two-piece fence, you’ll have to take care of positioning yet it gives you the adaptability to work with little bits of bigger size.

6. A Strong Base

With router tables, it’s all about maintaining the work-piece constant as well as secured at the area you desire them to be which’s why all the key parts need to be solid and durable in make as well as construct as well as the base is no various.

Obtaining clean cuts with a shaky base is hard, aggravating and really beat the objective of getting a router table.

These are the 5 vital elements that you need to consider while getting your next router table.

You could check out some current Router table evaluates here.

After that you could have an appearance at the Best router tables from Kreg, if you’re still confused.